The Isabella Fix-On 2 brackets can be used flat or stepped (by simply switching the two pads around). The stepped bracke… More info
Used to limit power consumption of the vehicle. Automatically reduces the output of the electric element in the boiler i… More info
Flexible hose connector which enables Reich taps to be easily joined to 12mm pipework. More info
Replacement microswitch to fit the Reich Twist range of taps. Please note the image displayed is slightly different. Ple… More info
Replacement microswitch for Reich Kama taps. More info
Replacement Bayonet Joint for 26mm (exterior diameter) awning poles. As used on many Isabella awnings. 22mm version a… More info
Pack of 3 drop stops, designed to fit over pole spikes to prevent rain water dripping through the eyelets of your Isabel… More info
90° Chrome Base Angle for Twist Taps, complete with replacement 'O' ring. More info
Bungee type elastic rings suitable for all Isabella awnings. Size of plastic base: 21mm (width of flat edge) x 14.5mm (… More info
Sensor with 2.5 m cable for measuring outdoor temperature. The temperature is then indicated on the control panel displa… More info
The Isabella telescopic coupling for Carbon-X frames, clamps telescopic poles into a fixed position. Suitable for 26mm a… More info
Time saving device that enables pegs or guide ropes to attach neatly without damaging or puncturing fabric. Pack of 4. P… More info
Corner joint for 26mm Isabella awning poles. Now only available in grey. More info
A tap connector which simply pushes in to the base of a Reich tap allowing connection to 1/2" (internal diameter) flexib… More info
Pack of 3 hook eyelets for 19mm (internal diameter) awning poles. More info
Replacement handle locks to fit our range of MPK 400 x 400 rooflights. Enable rooflights to be locked in the open or clo… More info
Wing screw with plastic head to fit either size telescopic couplings. Now only available in grey. More info
Pack of 3 rubber grommets. As fitted to Isabella awnings. More info
Connector which pushes in to the base of a Reich tap, enabling the tap to be connected to a 12mm push-fit fitting. More info
Copyright © Chris Ashwell 2014-17
